Figure 41 System Config > Logging Page Detail (Local Log Rotation); Figure 42 System Config > Logging Page Detail (Remote Log Sinks); Figure 43 System Config > Logging Page Detail (Add New Remote Sink) - Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

CHAPTER 3 Media Flow Manager Web-Based Interface
Figure 41 System Config > Logging Page Detail (Local Log Rotation)
Remote Log Sinks
View and Remove configured Log Sinks (remote servers receiving log messages from this
system). Click Save at the top of the page to make changes persistent across reboots.
•
Remote Sink—Address of configured Remote Sink.
•
Minimum Severity—The configured log severity level for this Remote Sink.
Figure 42 System Config > Logging Page Detail (Remote Log Sinks)
Add New Remote Sinks
Enter IP address and and choose a Minimum Severity level (described above). See
Figure 43
Click Apply to complete Remote Sink configuration, Cancel to revert to existing configuration.
Click Save at the top of the page to make changes persistent across reboots.
Figure 43 System Config > Logging Page Detail (Add New Remote Sink)
60 System Config
for graphic.
Media Flow Manager Administrator's Guide
Copyright © 2010, Juniper Networks, Inc.