Figure 81 Admission Control > Configure Page Detail (Monitored Nodes List); Figure 82 Admission Control > Configure Page Detail (Add Node To Be Monitored) - Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

CHAPTER 3 Media Flow Manager Web-Based Interface
Figure 81 Admission Control > Configure Page Detail (Monitored Nodes List)
Add Media Flow Controller node to monitoring list
Any Media Flow Controller that CMC is managing can be added to the Admission Control
monitoring list. See
•
Media Flow Controller Node Name—Choose a configured Media Flow Controller from
the drop-down list.
•
Media Flow Controller Node Interface—Enter the interface name (i.e. eth11) on which
the CMC will gather the monitoring data.
Click Add to complete the monitoring list configuration and Save at the top of the page to
make changes persistent across reboots.
Configuration changes take effect immediately from the next client request.
Figure 82 Admission Control > Configure Page Detail (Add Node to be Monitored)
88 Admission Control
Figure 82, below, for graphic.
Media Flow Manager Administrator's Guide
Copyright © 2010, Juniper Networks, Inc.