Table of Contents
Advertisement
CHAPTER 3 Media Flow Manager Web-Based Interface
Figure 69
CMC Profiles > Edit Profile Page Detail (All Commands)
System Configuration For a Selected Profile
Once you select a profile on the Edit Profile page, all of the navigation links at the left operate
only on the selected profile so you can make system configuration changes to the profile.
Once changes are made, you must re-apply it to any nodes or groups that have had that
profile applied. The links at left for editing profiles are given below.
DNS and Hosts
See
"System Config > DNS" on page 42
Web
See
"System Config > Web" on page
Users
See
"System Config > Users" on page
AAA (authentication)
See
"System Config > AAA (authentication)" on page
RADIUS
See
"System Config > RADIUS" on page
TACACS+
See
"System Config > TACACS+" on page
SNMP
See
"System Config > SNMP" on page
Faults
See
"System Config > Faults" on page
Logging
See
"System Config > Logging" on page
NTP
See
"System Config > NTP" on page
Licensing
See
"System Config > Licensing" on page
78
CMC Profiles
Media Flow Manager Administrator's Guide
and
"System Config > Hosts" on page
46.
48.
50.
51.
53.
55.
57.
59.
64.
65.
Copyright © 2010, Juniper Networks, Inc.
44.
Advertisement
Table of Contents
