Media Flow Manager Administrator's Guide
Notes:
•
usernames
•
users
what host they have connected from. Optionally, choose history to view the history of
user logins, past and present. You can also optionally specify a username and only the
history of that particular user is displayed.
•
whoami
web
Use these commands to enable and configure settings for the Web-based interface
Management Console, and proxy.
web
Configure the Web-based interface (Management Console). Web proxy commands follow.
See
"Configuring Web-Based Interface (Management Console)" on page 95
web
auto-logout <number_of_minutes>
enable
http enable [port <TCP_port>]
httpd listen enable [interface <interface_name>]
https enable [port <TCP_port>] [certificate regenerate]
proxy
auth
host <IP_address> port <TCP_port>
session
renewal <number_of_minutes>
timeout <number_of_minutes>
Notes:
•
auto-logout
Management Console automatically logs out a user. The no variant disables the
automatic logout feature. Default is 15 minutes.
•
enable
enabled.
•
—Configure HTTP access to the Web-based Management Console.
http
•
enable
Console. Default is enabled. This setting is only meaningful if the Management
Console as a whole is enabled via the web enable command.
•
port
Console. Default is 8080. The no variant resets to default, but does not disable HTTP.
•
redirect
•
httpd listen
—List of all user accounts and the capabilities of each.
—List of all currently logged-in users, and related information such as idle time and
—The username and capabilities of the currently logged-in user.
authtype {none | basic}
basic {password <plaintext_password> | username <username>}
—Control the length of user inactivity required before the Web-based
—Enable or disable (with no) the Web-based Management Console. Default is
—Enable or disable (with no) HTTP access to the Web-based Management
—Set the port number for HTTP access to the Web-based Management
—Enables re-direction to HTTPS to mandate secure access.
—Configure Web server interface access restrictions.
[redirect]
CHAPTER 5 CLI Commands
for task details.
web
149