CHAPTER 3 Media Flow Manager Web-Based Interface
TACACS+ Servers
In the server list: Remove, Enable and/or Disable TACACS+ Servers. See
•
Server—The configured IP address for this TACACS+ server.
•
Auth-Port—The configured port for authentication requests to this server.
•
Auth-Type—The configured type of authentication this TACACS+ server will use.
•
Key— The configured shared secret text string. If empty, the user is prompted for the key.
•
Timeout—The configured timeout for retransmitting a request.
•
Retransmit—The configured number of times a client may attempt to authenticate.
•
Enabled—Whether or not this TACACS+ server is enabled. Disabling a server makes it
inactive but does not delete it from the system.
Figure 33
System Config > TACACS+ Page Detail (TACACS+ Servers)
Add New TACACS+ Server
Add a new TACACS+ server, see
•
Enabled—The server must be enabled to do authentication.
•
Server IP—IP address for the server.
•
Auth Port—The port authentication requests should come in on; default is 49. You can
use the same IP address in more than one host as long as the auth-port is different.
•
Auth Type—Which type of authentication this TACACS+ server will use; both
authentication types transmit the username and password in un-encrypted text and are
acceptable when passwords are stored in an external database. Choose either:
•
ascii—American Standard Code for Information Interchange.
•
pap—Password authentication protocol (default).
To override defaults for a new TACACS+ server, you can also specify different Key, Timeout,
and Retransmit values for this TACACS+ server from the default TACACS+ settings you
made above.
Click Add TACACS+ Server to complete operation. Click Save at the top of the page to make
changes persistent across reboots.
54
System Config
Media Flow Manager Administrator's Guide
Figure
34, next; you need this information:
Figure 33.
Copyright © 2010, Juniper Networks, Inc.