Media Flow Manager Web-Based Interface - Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

CHAPTER 3 Media Flow Manager Web-Based Interface
CHAPTER 3

Media Flow Manager Web-Based Interface

The Media Flow Manager provides a Web-based interface (see
services and all needed system configurations. In addition to
(first two topics), these configuration topics are covered:
•
System
•
CMC Setup—Set CMC options and add nodes and/or groups of nodes to be managed.
•
CMC Profiles—Create profiles (sets of commands) and apply them to nodes and groups.
•
Preset Profiles—On defined take actions on managed nodes.
•
Service
•
Admission
•
View Logs—View the system log.
•
Reports—For configured nodes, generate reports.
This chapter describes each page of the Media Flow Manager and each option.
Figure 3 Media Flow Manager Login Page Detail
Copyright © 2010, Juniper Networks, Inc.
Config—Set up system functions, including hosts, users, security, and upgrades.
Director—Set GeoIP-based load distributing options.
Control—Set admission control options to work with Service Director.
Media Flow Manager Administrator's Guide
Figure 3) to three major
First Time Login and Monitoring
33