CHAPTER 3 Media Flow Manager Web-Based Interface
Figure 46
System Config > Configurations Page Detail (Active Configuration)
Upload Configuration File
Upload as local binary file or a local text file. See
•
Upload local binary file—Save the current configuration as a file.
•
Upload local text file—Execute a set of CLI commands in a text file you upload.
Figure 47
System Config > Configurations Page Detail (Upload Configuration)
Execute CLI Commands
Use this text box to enter CLI commands to be executed ad-hoc.
Import Configuration
Retrieve a configuration from a remote system. See
•
Hostname or IP address—The location of the desired configuration.
•
Remote Username—Login username.
•
Remote Password—Login password for the set Remote Username.
•
Remote Config Name—File name of the desired configuration.
•
New Config Name—A new name for the imported configuration (optional).
62
System Config
Media Flow Manager Administrator's Guide
Figure
47, below. Choose either:
Figure 48
for graphic.
Copyright © 2010, Juniper Networks, Inc.