Table of Contents
Advertisement
Media Flow Manager Administrator's Guide
CMC Setup > Groups
Once you've added the Media Flow Controllers that you want to manage, you can group them
logically. A group can be treated acted on as an individual appliance.
See
Figure
1. Enter a Group Name and Comment (optional) and click Add Group. A new page area
displays for the just-added group with checkboxes for each managed node.
2. Select each node that you want to include in the group and click Apply. To remove a node,
simply un-check its checkbox and click Apply again.
3. Click Save at the top of the page to make changes persistent across reboots.
Group all, Group <n>
Group all is a special group containing all available Media Flow Controllers. Beneath it are
configured groups.
Click Apply to complete the adding a Comment, Cancel to revert to existing configuration,
and Remove group (not available for default all group) to delete a group. Click Save at the
top of the page to make changes persistent across reboots.
Figure 60
CMC Setup > Groups Page Detail
CMC Setup > Identities
Use this page to create Media Flow Manager identities for authentication with ssh-dsa2 or ssh-
rsa2. See
60, next, for graphic. For CLI details, see
Figure 61
for graphic. See
CHAPTER 3 Media Flow Manager Web-Based Interface
auth. To add a CMC group:
cmc
for CLI details on the options.
cmc auth
CMC Setup
71
Advertisement
Table of Contents
