View Logs; Reports - Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Administrator’s guide and cli command reference
Table of Contents

Advertisement

Media Flow Manager Administrator's Guide

View Logs

The Media Flow Manager system log (syslog) records system activity including:
Continuous log, updated every 10 seconds.
Current log, that day's activity.
Archived (does not display if not applicable) log (1 - n)
Figure 83
CMC View Log Page Detail

Reports

The Current Report, based on the Media Flow Controller accesslogs loaded to the CMC /log
directory and is generated every 15 minutes. See
You can set an auto-upload on the nodes using the Service Config > Access/Error Log
Tip!
page of the node's Web-based interface or add a CLI command to your profile in the form of
accesslog copy <SCP>; by default the accesslog will upload to the specified URL when the
filesize reaches 100MB. See the
format).
CHAPTER 3 Media Flow Manager Web-Based Interface
Figure 84
"Command Arguments Key" on page 95
for graphic.
for the scp URL
View Logs
89

Advertisement

Table of Contents
loading

Table of Contents