4.1 Basic Copying Procedures
■
Automatic tray switching
This feature allows the machine to automatically switch to another paper tray with paper of the same
size, orientation, and type to continue with the copy job, when paper in the specified tray runs out.
This feature is called Automatic Tray Switching (ATS).
This feature is enabled by the Tools Administrator in Tools Mode.
All trays have this feature enabled as the factory setting.
If all trays are loaded with paper of the same size, type (normal paper) and orientation, the trays will
be switched in the order of trays 1, 2, 3, and 4.
● The factory setting can be changed in the Tools Mode. For details, refer to "8.3 Setting Tools Mode".
● When the optional HCF is equipped, the trays will then be switched in the order of tray 6 (HCF), trays 1, 2, 3, and 4.
56