Emptying Punch Scrap Container - Xerox 2101 User Manual

The message below will be displayed when it is time to empty the punch scrap container.
Discard the scraps when the message is displayed.
When pulling the punch scrap container out to dispose the punch scraps, ensure that all the scraps are
discarded. If there are scraps remaining, the container may be full before the next message is displayed, and
this may cause machine breakdown. Remove the container while the power is on.
If you switch off the power when emptying the scraps box, the machine will not be able to detect that the scraps
have been disposed.
Emptying Punch Scrap
Container
Procedure
1
Open the right door of the
finisher.
2
Pull out the punch scrap
container
direction indicated by the
arrow.
R4 in the
385