Stapling - Xerox 2101 User Manual

This feature allows you to output copies collated and stapled by sets. Copies are output
offset and can be stapled in two positions.
The number of sheets that can be stapled is 2 to 50 (FX P paper) using the staple cartridge for 50 sheets
(optional) and 2 to 100 (FX P paper) using the staple cartridge for 100 sheets. The maximum number of sheets
for stapling is 65 for standard-sized paper longer than 8.5×11", or for non-standard size paper with a 216 mm
edge parallel to the feeding direction.
● Suitable paper sizes for stapling and staple positions
The following paper sizes and positions are suitable for stapling:
Position
Paper Size
A4 portrait
B5 portrait,
16K portrait,
8×10" portrait,
8.5×11" portrait
A3
A4, 8.5×11", B4,
8.5×13", 8.5×14",
11×17", 8K
● Document orientation
Follow the diagram below for loading documents in the Head to Left orientation:
On the document glass

Stapling

Top Left×1 Top Right×1 Top×2
In the DADF
Output
Optional
Left×2 Right×2
99