5.32 Copying Documents of Different Settings (Build Job)
● In Build Job mode, Collated and
Uncollated cannot be selected.
● You can use registered settings of
Stored Job Templates for Build Job.
However, the setting of Build Job
cannot be programmed in the
memory.
● Settings for documents that have
been scanned for copying cannot be
changed.
184
4
Select Start.
The screen to build the job appears.
The example used in this explanation assumes that Annotation, Covers,
Separators, and Output/Finishing options are not selected.
5
Specify settings for copying.
To cancel the current selections:
When you press Clear All, the screen for canceling settings is displayed.
Follow the instructions displayed on the screen.
6
Press Start on the control panel.
The scanning of documents for copying will begin.
Once the scanning is completed, the display will return to the Build Job screen.