Original Orientation - Xerox 2101 User Manual

3.2.3

Original Orientation

This machine comes with the Margin Shift feature that allows you to adjust the position of the image
by adjusting its top, bottom, left, right positions. The orientation of the document must be right in
order for copying to be done correctly. The document orientation can be set by using the Original
Orientation feature. The machine will then be able to determine the top, bottom, left, and right
positions and move the image to the specified position to make copies.
There are two types of document orientations: Head to Top and Head to Left. As Head to Top is usually
the factory setting, load your documents in this orientation. For documents that cannot be loaded in the
Head to Top orientation, change the Original Orientation on the Others screen to Head to Left and load the
document in that orientation.
Head to Top setting
Head
On the document glass
Top edge
In the DADF
"5.14 Specifying Image Orientation"
● Features related to setting the original orientation are 2 to 1 Sided, Margin Shift, Mixed Size Originals, Multiple Up, Independent
X-Y%. Take note of these when you set the original orientation.
● You can change the factory setting of the original orientation to Head to Left in Tools Mode. For details, refer to "8.3 Setting
Tools Mode".
● Labels affixed on the document glass and DADF show the Head to Top setting. If the default value has been changed in Tools
Mode, the display shown and the labels will differ.
Top edge
3.2 Loading Documents
Head to Left setting
Head
Left edge
On the document glass
Left edge
In the DADF
49