Xerox 2101 User Manual page 186

5.26 Copying With Covers
● Load paper of the same size and orientation for the covers and the body pages.
● When using heavywt 1 paper as covers, load them in trays 2, 3, 4 and tray 5 (bypass). For details on heavy weight paper that
can be used, refer to "2.1 Paper to Use".
● The following types of paper cannot be used: heavywt 2 (163-220 g/m
● This feature cannot be combined with the following features: Bound Originals, Multiple Up, Transparency Separators, Mixed
Size Originals, Collated, and Repeat Image. However, Blank Covers can be combined with Bound Originals.
● The factory setting of Booklet Creation – Covers Tray is Tray 2. The factory setting can be changed in the Tools Mode. For
details, refer to "Chapter 8 System Administrator Mode Settings".
● Output Orientation of Covers (Face Up or Down)
When copying with covers attached, the output orientation for tray 5 (bypass) and tray 7 differs as
follows:
• With tray 5 (bypass) loaded, Face Up selected for Output Orientation and the papers to be used as covers
are placed facing up, the covers will be output facing up.
• With tray 7 loaded, Face Up selected for Output Orientation and the papers to be used as covers are
placed facing up, the covers will be output facing down.
The following table shows the image orientation on paper to be delivered to the finisher tray or the
output tray.
Output
Orientation
Face Up
Last page
1st page
Face Down
Last page
1st page
● This feature is available if Normal/Heavywt 1 is selected for tray 5 (bypass).
● For more details on the orientation of the document and paper to be used as covers when copying with covers attached and
with stapling/punching setting, refer to "Appendix C Originals/Copies Orientation (With Covers)".
156
Original
Select
Orientation
Delivered to Finisher
Tray (Staple:Top Left)
Head to Top
—
Head to Left
—
Head to Top
Head to Left
2
), transparency, and label.
Tray 5
Tray 7
Not Select Not Select
Delivered to
Output Tray
(Staple/Punch:Off)
—
—
Tray 7
Delivered to
Finisher Tray
(Staple:Top Left/
Off)
—
—