Xerox 2101 User Manual page 196

5.27 Creating a Booklet
● If Bi-Fold + Stapled is selected for a
copy of one page, stapling will
automatically be cancelled and a
folded copy will be output.
● The number of copies that can be
stapled is 2 to 14 if Printed Covers
is not selected for Covers.
● To cancel any setting, select Cancel.
● If you select Booklet Creation and
then select the paper on the Basic
Features screen, a screen appears
to confirm whether to cancel the
Booklet Creation feature. Follow the
instructions displayed on the screen
to perform the operation.
● The copies are output to the booklet
output tray in sets of 5 sheets each
when Bi-Fold is selected.
166
When selecting Folding/Stapling:
When the optional booklet maker finisher is installed, you can select Bi-Fold or
Bi-Fold + Stapled. If Bi-Fold + Stapled is selected, the copies are folded in
half and stapled at the center. The number of copies that can be stapled is 2 to
15.
(1)Select Folding/Stapling.
The Folding/Stapling screen appears.
(2)Select Bi-Fold or Bi-Fold + Stapling.
6
Select Save to specify settings for other features if necessary.
7
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
Copies will be made.
When Bi-Fold or Bi-Fold + Stapling is selected:
Copies are output to the booklet output tray.
Refer to "4.7 Removing Copies from the Booklet Output Tray" to remove the
copies.
●