Creating A Booklet; Booklet Creation - Xerox 2101 User Manual

This feature allows you to copy four pages of document onto a sheet of paper. To create a booklet, fold the
copies in half.
You can also set the center binding margin (gutter) and add front/back covers.
Document
Document
When the optional booklet maker finisher is installed, you can create bi-folded booklets or stapled booklets
folded in half.
When Bi-Fold or Bi-Fold + Stapling is selected, the available paper sizes are A4, 8.5×11", 8.5×13", 8.5×14",
B4, A3, 11×17", 8 K, and non-standard size (square paper or rectangular paper with a longer X-direction edge,
both paper are ranging from 210-297 mm in the Y-direction and 279-432 mm in the X-direction).
Document
● Up to 1000 sheets of documents can be scanned. Up to 60 pages can be scanned when you select Bi-Fold + Stapling. If
scanning exceeds 60 pages, a screen appears and prompts you to cancel stapling, folding in half and stapling, or copying.
● You cannot set 1 -> 1 Sided, 2 -> 1 Sided, Uncollated, Mixed Size Originals, Covers, Multiple Up, Repeat Image, Transparency,
Stapling, Punching, and Build Job by combination.
● If center margin (Gutter) and image shift (see Section 5.11) are both set, the image is shifted the sum of the image shift and the
center margint. The total shift distance = image shift + Gutter (any) mm.
● When using tray 5 (bypass) for covers in booklet creation, select Plain/Heavywt 1 for the paper quality.
● If the Annotation feature is set, stamp and other information is given to the right and left sides (or the upper and lower sides)
respectively.

Creating a Booklet

Booklet Creation

Left-Bound
Right-Bound
Top-Bound
Copies
Bi-Fold Bi-Fold + Stapled
161