Xerox 2101 User Manual page 43

No. Name
1 Touch panel display
2 Job Status button
3 System Settings/
Meter Check button
4 Power Saver button
5 Password button
6 Review button
7 Clear All button
8 Volume adjustment dial
9 Keypad
10 C (Clear) button
11 Start button
12 Interrupt button/indicator
13 Stop button
Displays the respective features and machine status.
Touch this panel directly to select the features and instructions displayed.
"1.3.2 Touch Panel Display"
Press to check the presently processed job.
On the Job Status screen, once a job is selected, you can pause it if it is being
scanned or delete it if is paused. When printing multiple jobs, you can
promote a print job over ones that are waiting to be printed. The promoted job
is printed following the job that is currently being printed.
For the system administrator to press to define the specifications of the copier
features, or to check the meter reading or status of the consumables.
● To use the Tools Mode and the Auditron Administration Mode, switch to the
copier control panel for operation. For details of the switching, refer to "8.1.1
Using System Administrator Mode".
Press to put the machine in the Power Saver mode if it is not to be used for a
while to reduce power consumption.
The Power Saver indicator light will be lit if it is in Power Saver mode. To
return to the Ready (Copy) mode, press the button again.
Press to display the Password Entry screen if the Auditron Mode is enabled.
Use of the machine can be controlled by requiring each user to enter his
password (by department/user).
Press to check the copy settings.
You can check the status of the settings displayed on the screen.
In the Copy, Save to File, Copy and Save modes, you can check copy settings
before pressing the Start button. You can also check the copy settings of a
selected job from the list on the Job Status screen.
In the Edit/Print Files mode, you can check the copy settings of the selected
copy file when saved.
Press to clear all settings and return to the default screen. The default screen
is the screen that is displayed when the machine is switched on.
Turn to set the volume of error tones to inform you of a completed copy job or
a machine fault. Adjust by rolling the dial to the left or right.
● You can also set the tone off. For details, refer to "Setting Tone" in ""8.2
Overview of Tools Mode".
Use the keys on this keypad to enter numeric values, such as the number of
sets to be copied.
Press to delete or correct a wrong entry made by using the keypad.
Press to start copying.
Press to interrupt the current copy job for an urgent job. The indicator light on
the left lights up when this button is pressed.
Press again to cancel the interrupted copy job and return to the original copy
job.
Press to stop the current copy job.
1.3 Using the Touch Panel Display
Function
13