Xerox 2101 User Manual page 20

Safety Notes
Sudden temperature fluctuations can affect copy quality. Rapid
heating of a cold room can cause condensation inside the
machine, directly interfering with image transfer.
Electrical Safety
The 2101 copier/printer and the recommended
maintenance supplies have been designed
and tested to meet strict safety requirements.
Attention to the following notes will ensure the
continued safe operation of your copier/
printer.
Use only the power cord supplied with this
equipment.
Plug the power cord directly into a grounded
electrical outlet. Do not use an extension cord.
If you do not know whether or not an outlet is
grounded, consult a qualified electrician.
Do not use a ground adapter plug to connect
this equipment to an electrical outlet that lacks
a ground connection terminal.
This machine is to be used on a 208-240V
15A branch circuit. If this machine needs to be
moved to a different location, contact a Xerox
service representative.
You may get a severe electrical shock if the
outlet is not correctly grounded.
Do not place the copier/printer where people
may step on or trip on the power cord. Do not
place objects on the power cord.
Do not override or disable electrical or
mechanical interlocks.
Do not obstruct the ventilation openings.
These openings are provided to prevent
overheating of the machine.
xviii
● Do not expose the machine to direct sunlight.
Exposure to direct sunlight can adversely
affect the machine's performance.
Never push objects of any kind into slots or
openings on this equipment. Making a contact
with a voltage point or shorting out a part could
result in fire or electrical shock.
If any of the following conditions occur, switch
off the power to the machine immediately and
disconnect the power cord from the electrical
outlet. Call an authorized Xerox service
representative to correct the problem.
• The machine emits unusual noises or odors.
• The power cord is damaged or frayed.
• A wall panel circuit breaker, fuse, or other
safety device has been tripped.
• Liquid is spilled into the copier/printer.
• The machine is exposed to water.
• Any part of the machine is damaged.
Disconnect Device
The power cable is the disconnect device for this
equipment. It is attached to the back of the ma-
chine as a plug-in device. To remove all electrical
power from the machine, disconnect the power
cable from the electrical outlet.