Maximum Login Attempts; Login Setup/Auditron Administration - Xerox CopyCentre 133 User Manual

11 Setups

Maximum Login Attempts

With this feature enabled, the machine denies access when an incorrect System
Administrator ID is entered the selected number of times. You can select this number
in the range from 1 to 10.
1.
Select [Maximum Login
Attempts] on the [System
Administrator Settings] screen.
2.
Perform the necessary
operations.
3.
Select [Save].

Login Setup/Auditron Administration

The Auditron feature is used to prevent the machine from being used by unauthorized
users, impose different restrictions on individual users (accounts), and track the total
number of copies, faxes, scanned pages, and prints for each account. When the
Auditron feature is active, users need to enter a correct user ID, or both user ID and
password, in order to use the machine. Using entered user IDs, the Auditron identifies
different accounts and tracks jobs done with each account. The [Login Setup/Auditron
Administration] screen allows you to start configuring various Auditron settings. For
more information, refer to the following.
Create/Check User Accounts – page 259
Reset User Accounts – page 260
System Administrator Copy Meter – page 261
User Details Setup – page 261
Charge Print Settings – page 262
Fax Billing Data – page 263
Remote Login Setup – page 263
Login Setup/Auditron Mode – page 264
1.
Select [Login Setup/Auditron
Administration] on the [System
Settings] screen.
2.
Select the required option.
3.
Select [Close].
258 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide