4.1 Basic Copying Procedures
■
Checking settings of saved files
You can check the copy settings of the copy files saved in the server.
● If the build job files and merged files are selected, all the settings for the entire file are displayed.
● You can also select the folder by
entering the folder number from the
keypad and then pressing Start on
the control panel.
● The password screen is displayed if
the folder password is enabled.
58
Procedure
1
Select Select Folder to display the Hard Disk (Copy File)
screen.
A list of copy files stored on the server is displayed.
2
From the list, select the folder with the files that you want to
check and then press the Select Folder button.
3
Select the copy file with the settings that you want to check and
then press the Review button.
The Review screen is displayed.