Xerox 2101 User Manual page 62

2.2 Loading Paper/Changing Paper Size of Paper Trays
● For details on selecting paper size,
refer to "5.3 Selecting Paper Tray".
● Shift the paper guide if you are
copying onto the following paper
sizes: SRA3 (320 450mm/12.6 17.7")
of A/B Series Size; 12 18" of Inch
Size. For details on shifting the
paper guide, refer to "2.2.2 Loading
Paper in Tray 5 (Bypass)".
32
5
Select A/B Series, Inch, or Non-standard as the paper size
type, then select the paper size.
6
Specify the paper type by selecting Paper Type.
7
Specify settings for other features if necessary, and then start
copying.
8
After copying, shift the paper guide to the Standard position by
following Steps 2 to 4.
9
Move tray 5 (bypass) back
to its original position after
copying.
Remove any paper still remaining
in tray 5 (bypass).
If you have pulled out the
extension flap, push it back to its
original position and close the
tray.
●