Xerox 2101 User Manual page 355
Xerox 2101: user guide
Hide thumbs
Also See for 2101:
- Configuration manual (192 pages) ,
- User manual (22 pages) ,
- Customer release notes (14 pages)
Table of Contents
Advertisement
Symptoms
Document jams occur
very often.
Paper is often jammed
or wrinkled.
The document cannot
be fed into the DADF.
The document edge is
folded.
Check Point
Are suitable documents used?
Are your documents out of shape, name
cards, transparencies or of thin material?
Does the document have any adhesive
paper, clips or cellophane attached to it?
Is the document guide skewed?
Is the document torn and pieces of the
paper left in the DADF?
Is paper properly loaded in the paper
tray?
Is the paper tray properly set?
Is the paper loaded in the paper tray
folded or wrinkled?
Is the paper curled?
Are there jammed/torn paper or foreign
objects left inside the machine?
Is the paper moist or damp?
Is paper loaded in the paper tray of the
correct specification?
Has the paper in the paper tray exceeded
the maximum fill line?
Is the document too small?
Is the document curled?
9.1 Troubleshooting
Treatment
Load suitable documents on the DADF.
"3.1 Types of Documents"
"3.2 Loading Documents"
Remove all attachment like adhesive
paper, clips and cellophane before
making copies.
Set the document guide properly.
"3.2.2 Loading in DADF"
Open the DADF cover to check.
"9.3 Clearing Document Jams"
Load the paper properly.
"2.2 Loading Paper/Changing
Paper Size of Paper Trays"
Push in the paper tray completely.
"2.2 Loading Paper/Changing
Paper Size of Paper Trays"
Replace with paper from a new ream.
"2.2 Loading Paper/Changing
Paper Size of Paper Trays"
Turn over the paper in the paper tray or
replace with paper from a new ream.
"2.2 Loading Paper/Changing
Paper Size of Paper Trays"
Open the machine or pull out the paper
tray to remove the paper or objects.
"2.2 Loading Paper/Changing
Paper Size of Paper Trays"
Replace with paper from a new ream.
"2.2 Loading Paper/Changing
Paper Size of Paper Trays"
Replace with paper of the correct
specification.
"2.1 Paper to Use"
"2.2 Loading Paper/Changing
Paper Size of Paper Trays"
Do not load the paper exceeding the
maximum fill line.
"2.2 Loading Paper/Changing
Paper Size of Paper Trays"
The smallest size that can be loaded in
the DADF is A5.
"3.1 Types of Documents"
Straighten the document and load it
again.
325
Advertisement
Table of Contents
