Xerox 2101 User Manual page 426

A Specifications
Booklet Output Tray
$
Interposer (Tray 7)
Power
Dimensions
Weight
● The booklet output tray is used for the booklet maker finisher.
396
Paper Size A3, B4, A4, 11×17", 8.5×14", 8.5×13", 8.5×11", 8 K, non-standard sizes
Non-standard sizes are as follows:
• Y direction: 210 to 297 mm, X direction: 279 to 432 mm
• X and Y are the same sizes.
• Y is shorter than X.
Capacity 20 sets
Maximum Number of 15 sheets (90 g/m
Stapled Sheets
* Becomes 14 sheets when adding covers.
Stapling Position Two-stapled
G.S.M. 60 to 90 g/m
* 220 g/m
Paper Size
A3, B4, A4
8.5×11"
Contact your Customer Support Center in the following cases:
*1 When changing A4 to 8.5×11" paper
*2 When changing B5 portrait to 8×10" paper
*3 When changing 8.5×14" to 8.5×13"paper
You cannot copied on the paper loaded in tray 7.
Capacity 200 sheets (FX P and L paper)
G.S.M. 60 to 220 g/m
From the main body
<Staple finisher>
(W) 1,045 × (D) 725 × (H) 1,165 mm
<Booklet maker finisher>
(W) 1,050 × (D) 725 × (H) 1,165 mm
<Staple finisher>
105 kg or less (including staple cartridge)
<Booklet maker finisher>
130 kg or less (including booklet staple cartridge)
2
*
)
2
*
2
for covers
*1
, A4 portrait, B5 portrait
*1
, 8.5×11" portrait, 8×10" portrait
2
*2 *3
, 11×17", 8.5×14" , 8.5×13"
*2
, 8 K, 16 K portrait
*3
,