4.1.2
Checking Settings
You can check settings on the displayed Review screen.
For copy files stored in the server, you can check the features specified when saved.
■
Checking settings
In the Copy, Save to File, Copy and Save modes, you can check the specified features before
pressing the Start button.
● For copy jobs, settings that are in the midst of being specified will also be reflected on the Review screen if it is displayed.
● Only settings related to the files being specified will be displayed when specifying Build Job settings.
● You can also check the settings on
the Job Status screen. For details,
refer to "4.1.4 Checking Job Status".
● The features that are not enabled
are dimmed.
Procedure
1
Press
Review
control panel.
The Review screen is displayed.
2
Select Close when all the
settings have been checked.
The display returns to the Basic Features screen.
●
4.1 Basic Copying Procedures
on
the
57