Folding Unit (Z And C) - Xerox 2101 User Manual

9.2.9

Folding Unit (Z and C)

This section explains how to remove jammed paper from inside the folding unit (Z and C) when this
optional unit is installed in a staple finisher (optional) or a booklet maker finisher (optional); "Paper
jam at areas R5 and R11"; "Paper jam at tri-fold output tray R9 and area R10"; "Paper jam at areas
R6 and R7"; "Paper jam at areas R7 and R8a/area R8b and tri-fold output tray R9"; "Paper jam at unit
R17, areas R18 and R19".
Open the right cover as shown below to clear the jammed paper.
● The messages displayed vary depending on the position of the paper jam.
● If levers or covers are not properly set or are not completely closed, a message appears and the machine will not start. If a
document or paper is jammed in a position other than in the folding unit, another message appears. Follow the instructions to
clear the jammed paper.
■
Paper jam at lever R5 and knob R11
The following message will be displayed if paper is jammed at lever R5 and knob R11 of the finisher.
Follow the instructions below to clear the jammed paper.
9.2 Clearing Paper Jams
351