Xerox 2101 User Manual page 141

● If paper jam occurs, reload the
current stack of documents. For
details on treating paper jams, refer
to "9.3 Clearing Document Jams".
● If you are using the DADF, do not lift
up the document glass cover when
changing the stack of documents.
3
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
Copying will begin.
4
When the stack of documents has been scanned for copying,
a message will appear on the right of the screen as follows:
5
Documents loaded in the DADF will be placed in the output
tray after being scanned. Remove them from the tray.
Ensure that the stack of documents that has been scanned for copying is not
mixed up with the next stack to be scanned.
If paper jam occurs, reload the current stack of documents for scanning.
6
Load the next stack of documents, and then press Start.
Scanning of the documents for copying will begin.
7
When all the documents have been loaded, press End Job.
The remaining copy job starts.
If you use the DADF to load the documents, you can also select and End Job
on the screen that is displayed while the copy job is in progress.
●
5.9 Loading Documents in Batches
111