Xerox 2101 User Manual page 433

Selected Feature
(Second selection)
Selected Feature
(First selection)
Annotation
Margin Shift - Auto Center
Margin Shift - Corner (Side 1)
Margin Shift - Corner (Side 2)
Margin Shift - Variable (Side 1)
Margin Shift - Variable (Side 2)
Edge Erase - Top & Bottom
Edge Erase - Left & Right
Edge Erase - Binding
Copy to Edge
Document in DADF
Document on Document Glass
Mixed Size Original
Original Size
Original Size - Auto Size Detect
Original Orientation Head to Top
Original Orientation Head to Left
Output - Auto
Output - Collated
Output - Uncollated
2-Sided - 1 to 1
2-Sided - 1 to 2
2-Sided - 2 to 2
2-Sided - 2 to 1
2-Sided - Original
2-Sided - Copies
Large Output
Sample Set
Multiple Up
Repeat Image
Covers
Transparency Inserters
Tab Copying
Booklet Creation
Blank: First & second selects can be combined.
A: First & second selections cannot be combined.
B: Second selection is not available.
C: Selections can be made but the first selection is ignored.
D: Selections can be made but the second selection is
ignored.
E: First selection will be changed to another selection.
S: When Start button is pressed, message will appear to say
that copying cannot be done.
U: When selecting a feature, a message is displayed that the
feature cannot be used with the one already selected.
1: Cannot enlarge.
2: Selection is based on the first document.
3: There are restrictions in High Document Volume mode,
such as the status changes to interrupt copying mode
when End Job is selected.
*1 The feature cannot be used with this machine.
S S S S S
B B B B B 8 8 8 8 8
E E E
E E E
E E E E E E
B E E E E E E
S
S S S S S
S S S S S
B B B B B
B
B B B B B
B B B B B B B B B B B B B
15 15 15 15 15
B B B B B B B B B
B B B B B 18 18 S 18 S S B B
B B B B B B B B B
4: Covers (without images), Annotation, Output Orientation,
and Stapling/Punching for the entire build job files can be
used.
5: Can be selected only when a tray is specified and
Reduce/Enlarge is Auto.
6: Interrupt copying remains active until the status changes
to End Job.
7: Set through Build Job. Separators are inserted between
segments.
8: Stapling can be used if documents have the same size in
the Y direction.
9: Covers function is used in each segment.
10: When tray 7 is selected, the staple and punch positions
are limited according to the orientation of the paper.
11: You can select the paper size from tab paper (Heavy
weight paper 1 or 2), A4 portrait, or 8.5 x 11" portrait.
B Possible Combinations of Features
Build
Job
B B
B B
3 B
B
B
B B B B
17 17 17 B
B B B B B
12: Available when used as a tray. Copies are output facing
up.
13: Priority printing is possible while printing the build job
files. In priority printing, you can switch Copy mode to
Build Job mode.
14: A calculation to rotate the paper for the specified folding
is made.
15: Possible only when images are not attached.
16: Heavy weight paper 2 cannot be used.
17: Copies are facing up for plain/heavy weight 1 paper or
copies are facing down for heavy weight 2 paper.
18: Although combinations of features are possible,
annotations are not printed.
19: W hen heavy weight paper 1 is selected with "Folding",
the Start button cannot be pressed.
-: Not available
B
%
403