Xerox 2101 User Manual page 436

C Originals/Copies Orientation (With Covers)
*1
Copies result
&
*1: Displays the result when front cover is added to copies that have had the stapling option set.
*2: Displays document orientation when using DADF only. When using document glass, set as follows:
Head to Top
*3: For information on stapling setting, refer to "5.5 Stapling".
*4: For information on document orientation, refer to "5.14 Specifying Image Orientation".
*5: For information on output orientation, refer to "5.24 Outputting Face Up/Down".
*6: When Tray 7 is selected together with the staple option, staple positions enclosed in bold rules in the table are not available. This
limitation can be changed by a customer engineer. Contact your Customer Support Center for information.
406
Document setting
Orientation
*3
Staple
*2
on DADF orientation
Head to Top
Top Left
Head to Left
Head to Top
Top Right
Head to Left
Top
Head to Left
Double
Left
Head to Top
Double
Right
Head to Top
Double
Head to Left
Original Output
*4 *5
orientation
Face Down
Copies are
output facing
down.
Copy paper setting
Tray 7 not
Tray 7 selected
selected
Tray 5 Tray 5
*6
Tray 7