Xerox 2101 User Manual page 59

● After you have replenished the
paper supply, you can press the
Start button on the control panel to
resume copying.
● Change the paper type setting if you
need to change both the paper size
and type. The paper type setting is
done by the administrator. For
details, refer to "2.3 Checking/
Changing Paper Supply Settings".
(6)Paste the paper size
label on the tray.
3
Push the tray in slowly
until the end.
Once the tray is correctly set, the
message, "Press Start button to
continue." will be displayed.
4
From Paper Supply on the Basic Features screen, check if
the changed paper size for the paper tray is correctly
displayed.
If the changed paper size is not displayed, repeat Step 5 and check that levers
A and B are at the correct positions.
●
2.2 Loading Paper/Changing Paper Size of Paper Trays
29