Copying On Tab Paper - Xerox 2101 User Manual

You can copy images from a document onto tab paper by specifying the copied position within a range of 1-15
mm so that the image would be copied onto the tab.
These copied papers can be loaded in Tray 7 and used as covers or separators.
Available tab paper sizes are A4 portrait and 8.5×11" portrait.
● Be sure to use the tab paper recommended by Fuji Xerox. Otherwise, a paper jam or failure may result.
Document
ort
p
Re
Copy to Tab
The image is copied only onto the tab of the tab paper. You can specify the position to shift within a range of
1 to 15 mm.
Shift All
The entire page is copied onto the tab paper. You can specify the position to shift within a range of 1 to 15
mm.
● The factory setting for the margin shift is 13 mm.
● Tab Copying cannot be selected with Margin Shift, Edge Erase, Binding Erase, Multiple Up, Repeat Image, Booklet Creation,
Annotation, Bound Originals, Book Duplex, or 2 Sided Copying features.
● It is recommended that 100% for Reduce/Enlarge is set to copy onto the correct position.
● You can select only the left position for stapling/punching on tab papers.

Copying on Tab Paper

Copy
Copy to Tab Shift All
Re
Range of shifting the
Original Size
image (1-15 mm)
using copies as cover separators
ort
p
p
Re
Tab Copying
ort
171