Start The Job - Xerox WorkCentre 5638 Quick Start Manual

1. PREPARATION
2. LOAD THE DOCUMENTS
3.
MAKE COPIES AND SAVE
Features Button
Press the Features
button to display the
features selection
screen.
Quantity of Copies
Use the numeric keypad
to enter the quantity of
copies to be made.
4.

START THE JOB

How to save a job for Reprint
Cancel any selections made by a previous user by pressing the AC (Clear All) button.
Remove any staples and paper clips from your documents and ensure that the
documents are in good condition.
Place the documents in the Document Handler in order (1,2,3...) with page 1 face up on
top.
Slide the document guides against the front and rear edges of the documents.
OR
Place the document face down on the Document Glass and register it to the rear right
corner.
All Services Button
Select the All Services button OR the Save Job
for Reprint tab.
Job Name
Select the New Job Name button. and input a
unique and meaningful name for your saved job.
Press the Start button to start your job.
That completes the procedure.
WorkCentre
5632/5638/5645/5655/5665/5675/5687
Save Job for Reprint Button
Select the Save Job for Reprint button. If you cannot
see the Save Job for Reprint button, select the More
Service button first.
Destination Folder
Select the Save Only or Copy and Save button. From
the folder list, select a folder as the destination for
your saved job.
MORE INFORMATION
For more information, please refer to:
- Interactive User Guide CD 2
- Quick Use Guide
- http://www.xerox.com/support