Cisco CP-7911G-CH1 System Administrator Manual page 91

Setting Up Cisco Unified IP Phones using SCCP
DETAILED STEPS
Command or Action
Step 1
clock timezone zone hours-offset
[minutes-offset]
Example:
Router(config)# clock timezone PST -8
Step 2
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Step 3
date-format {mm-dd-yy | dd-mm-yy | yy-dd-mm |
yy-mm-dd}
Example:
Router(config-cm-fallback)# date-format
yy-dd-mm
Step 4
time-format {12 | 24}
Example:
Router(config-cm-fallback)# time-format 24
Step 5
exit
Example:
Router(config-cm-fallback)# exit
Example
The following example sets the time zone to Pacific Standard Time (PST), which is 8 hours behind UTC
and sets the time display format to a 24 hour clock:
Router(config)# clock timezone PST -8
Rounter(config)# call-manager-fallback
Rounter(config-cm-fallback)# time-format 24
OL-13143-04
Purpose
Sets the time zone for display purposes.
zone: Name of the time zone to be displayed when
•
standard time is in effect. The length of the zone
argument is limited to 7 characters.
hours-offset: The number of hour difference from
•
Coordinated Universal Time (UTC).
• minutes-offset (Optional). Minutes difference from
UTC.
Enters call-manager-fallback configuration mode.
Sets the date format for IP phone display. The choices are
mm-dd-yy, dd-mm-yy, yy-dd-mm, and yy-mm-dd, where
dd: day
•
mm: month
•
yy: year
•
The default is set to mm-dd-yy.
Sets the time display format on all Cisco Unified IP Phones
registered with the router. The default is set to a 12-hour
clock.
Exits call-manager-fallback configuration mode.
Cisco Unified SCCP and SIP SRST System Administrator Guide
How to Set Up Cisco Unified IP Phones
91