Cisco CP-7911G-CH1 System Administrator Manual page 171

Configuring Call Handling
Command or Action
Step 9
after-hour exempt
Example:
Router(config-register-pool)# after-hour exempt
Step 10
end
Example:
Router(config-register-pool)# end
Examples
The following example defines several patterns of digits for which outgoing calls are blocked. Patterns 1
and 2, which block calls to external numbers that begin with 1 and 011, are blocked on Monday through
Friday before 7 a.m. and after 7 p.m. Pattern 3 blocks calls to 900 numbers 7 days a week, 24 hours a day.
call-manager-fallback
after-hours block pattern 1 91
after-hours block pattern 2 9011
after-hours block pattern 3 91900 7-24
after-hours day mon 19:00 07:00
after-hours day tue 19:00 07:00
after-hours day wed 19:00 07:00
after-hours day thu 19:00 07:00
after-hours day fri 19:00 07:00
The following example exempts a Cisco SIP phone pool from the configured blocking criteria:
voice register pool 1
after-hour exempt
Verification
To verify the feature's configuration, enter one of the following commands:
•
•
•
For more information about these commands, see
Command Reference (All Versions).
OL-13143-04
show voice register dial-peer: Displays all the dial peers created dynamically by phones that have
registered. This command also displays configurations for after hours blocking and call forwarding.
show voice register pool <tag>: Displays information regarding a specific pool.
debug ccsip message: Debugs basic B2BUA calls.
Purpose
Specifies that for a particular voice register pool, none of its
outgoing calls are blocked even though call blocking is
enabled.
Returns to privileged EXEC mode.
Cisco Unified SRST and Cisco Unified SIP SRST
Cisco Unified SCCP and SIP SRST System Administrator Guide
How to Configure Cisco Unified SIP SRST
171