Cisco CP-7911G-CH1 System Administrator Manual page 128

How to Configure Cisco Unified SCCP SRST
•
Configuring Call Forwarding During a Busy Signal or No Answer
Incoming calls that reach a busy signal or go unanswered during Cisco Unified CM fallback can be
configured to be forwarded to one or more E.164 numbers.
SUMMARY STEPS
1.
2.
3.
4.
DETAILED STEPS
Command or Action
Step 1
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Step 2
call-forward busy directory-number
Example:
Router(config-cm-fallback)# call-forward busy
50..
Cisco Unified SCCP and SIP SRST System Administrator Guide
128
Enabling Translation Profiles, page 140
–
Verifying Translation Profiles, page 143
–
Hunting and Ringing Timeout Behavior
Configuring Dial-Peer and Channel Hunting, page 144
–
Configuring Busy Timeout, page 145
–
Configuring the Ringing Timeout Default, page 146
–
call-manager-fallback
call-forward busy directory-number
call-forward noan directory-number timeout seconds
exit
(Optional)
(Optional)
(Optional)
(Optional)
(Optional)
Purpose
Enters call-manager-fallback configuration mode.
Configures call forwarding to another number when the
Cisco IP phone is busy.
directory-number: Selected directory number
•
representing a fully qualified E.164 number. This
number can contain "." wildcard characters that
correspond to the right-justified digits in the directory
number extension.
Configuring Call Handling
OL-13143-04