Disabling Sip Supplementary Services For Call Forward And Call Transfer - Cisco CP-7911G-CH1 System Administrator Manual

Cisco Unified SIP SRST 4.1

Disabling SIP Supplementary Services for Call Forward and Call Transfer

Perform the following steps to disable REFER messages for call transfers and redirect responses for call
forwarding from being sent to the destination by Cisco Unified SRST. You can disable these
supplementary features if the destination gateway does not support them.
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
voice service voip
or
dial-peer voice tag voip
Example:
Router(config)# voice service voip
or
Router(config)# dial-peer voice 99 voip
OL-13143-04
enable
configure terminal
voice service voip
or
dial-peer voice tag voip
no supplementary-service sip {moved-temporarily | refer}
end
How to Configure Cisco Unified SIP SRST 4.1 Features
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Enters voice-service configuration mode to set global
parameters for VoIP features.
or
Enters dial peer configuration mode to set parameters for a
specific dial peer.
Cisco Unified SCCP and SIP SRST System Administrator Guide
81