Cisco CP-7911G-CH1 System Administrator Manual page 246

How to Integrate Voice Mail with Cisco Unified SCCP and SIP SRST
DETAILED STEPS
Command or Action
Step 1
vm-integration
Example:
Router(config)# vm-integration
Step 2
pattern direct tag1 {CGN | CDN | FDN} [tag2
{CGN | CDN | FDN}] [tag3 {CGN | CDN | FDN}]
[last-tag]
Example:
Router(config-vm-int)# pattern direct 2 CGN *
Step 3
pattern ext-to-ext busy tag1 {CGN | CDN |
FDN} [tag2 {CGN | CDN | FDN}] [tag3 {CGN |
CDN | FDN}] [last-tag]
Example:
Router(config-vm-int)# pattern ext-to-ext
busy 7 FDN * CGN *
Step 4
pattern ext-to-ext no-answer tag1 {CGN | CDN
| FDN} [tag2 {CGN | CDN | FDN}] [tag3 {CGN |
CDN | FDN}] [last-tag]
Example:
Router(config-vm-int)# pattern ext-to-ext
no-answer 5 FDN * CGN *
Cisco Unified SCCP and SIP SRST System Administrator Guide
246
Integrating Voice Mail with Cisco Unified SRST
Purpose
Enters voice-mail integration mode and enables voice-mail
integration with DTMF and analog voice-mail systems.
Configures the DTMF digit pattern forwarding necessary to
activate the voice-mail system when the user presses the
messages button on the phone.
tag1: Alphanumeric string fewer than four DTMF digits
•
in length. The alphanumeric string consists of a
combination of four letters (A, B, C, and D), two
symbols (* and #), and ten digits (0 to 9). The tag
numbers match the numbers defined in the voice-mail
system's integration file, immediately preceding either
the number of the calling party, the number of the called
party, or a forwarding number.
tag2 and tag3: (Optional) See tag1.
•
last-tag: See tag1. This tag indicates the end of the
•
pattern.
CGN: Calling number (CGN) information is sent to the
•
voice-mail system.
CDN: Called number (CDN) information is sent to the
•
voice-mail system.
• FDN: Forwarding number (FDN) information is sent to
the voice-mail system.
Configures the DTMF digit pattern forwarding necessary to
activate the voice-mail system once an internal extension
attempts to connect to a busy extension and the call is
forwarded to voice mail. For argument and keyword
information, see Step 2.
Configures the DTMF digit pattern forwarding necessary to
activate the voice-mail system once an internal extension
fails to connect to an extension and the call is forwarded to
voice mail. For argument and keyword information, see
Step 2.
OL-13143-04