How To Configure Cisco Unified Sip Srst; Configuring Sip Phone Features - Cisco CP-7911G-CH1 System Administrator Manual

How to Configure Cisco Unified SIP SRST

How to Configure Cisco Unified SIP SRST
This section contains the following procedures:
•
•
•
•
•

Configuring SIP Phone Features

After a voice register pool has been set, this procedure adds optional features to increase functionality.
Some features can be made per pool or globally.
In voice register pool configuration, you can now configure several new options per pool (a pool can be
one phone or a group of phones). There is also a new voice register global configuration mode for
Cisco Unified SIP SRST. In voice register global mode, you can globally assign characteristics to
phones.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Cisco Unified SCCP and SIP SRST System Administrator Guide
164
Configuring SIP Phone Features, page 164
Configuring SIP-to-SIP Call Forwarding, page 166
Configuring Call Blocking Based on Time of Day, Day of Week, or Date, page 168
SIP Call Hold and Resume, page 172
Examples, page 172
enable
configure terminal
voice register global tag
max-pool max-voice-register-pools
application application-name
external ring {bellcore-dr1 | bellcore-dr2
exit
voice register pool tag
no vad
codec codec-type [bytes]
end
(optional)
(required)
(no configuration necessary)
bellcore-dr3
| |
Configuring Call Handling
(required)
bellcore-dr4 bellcore-dr5}
|
OL-13143-04