Cisco CP-7911G-CH1 System Administrator Manual page 113

Setting Up Cisco Unified IP Phones using SIP
Command or Action
Step 4
translation-profile outgoing profile-tag
Example:
Router(config-register-pool)#
voice translation-rule 1
rule 1 /1000/ /1006/
!
!
voice translation-profile 1
translate called 1
!
voice register pool
translation-profile outgoing 1
Step 5
alias tag pattern to target [preference value]
Example:
Router(config-register-pool)# alias 1 94... to
91011 preference 8
OL-13143-04
xxx
Purpose
Use this command to apply the translation profile to a
specific directory number or to all directory numbers on a
SIP phone.
Profile-tag: Translation profile name to handle
•
translation to outgoing calls.
Allows Cisco Unified SIP IP Phones to handle inbound
PSTN calls to telephone numbers that are unavailable when
the main proxy is not available. The keywords and
arguments are defined as follows:
tag: Number from 1 to 5 and the distinguishing factor
•
when there are multiple alias commands.
pattern: The prefix number; matches the incoming
•
telephone number and may include wildcards.
to: Connects the tag number pattern to the alternate
•
number.
target: The target number; an alternate telephone
•
number to route incoming calls to match the number
pattern.
• preference value: (Optional) Assigns a dial-peer
preference value to the alias. The value argument is the
value of the associated dial peer, and the range is from
1 to 10. There is no default.
Cisco Unified SCCP and SIP SRST System Administrator Guide
How to Configure the SIP Registrar
113