Cisco CP-7911G-CH1 System Administrator Manual page 67

Setting Up the Network
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
ccm-manager fallback-mgcp
Example:
Router(config)# ccm-manager fallback-mgcp
Step 4
application [application-name]
Example:
Router(config) application app-xfer
Step 5
global
Example:
Router(config)# global
OL-13143-04
enable
configure terminal
ccm-manager fallback-mgcp
application [application-name]
global
service [alternate | default] service-name location
exit
Purpose
Enables privileged EXEC mode.
Enter your password when prompted.
•
Enters global configuration mode.
Enables the gateway fallback feature and allows an MGCP
voice gateway to provide call processing services through
SRST or other configured applications when
Cisco Unified Communications Manager is unavailable.
The application-name argument is optional and indicates
the name of the specific voice application to use if the
application in the dial peer fails. If a specific application
name is not entered, the gateway uses the DEFAULT
application.
Enters global configuration mode.
Cisco Unified SCCP and SIP SRST System Administrator Guide
How to Set Up the Network
67