Cisco CP-7911G-CH1 System Administrator Manual page 298

How to Use Cisco Unified SRST Gateways as a Multicast MOH Resource
11.
12.
13.
14.
15.
DETAILED STEPS
Command or Action
Step 1
ccm-manager music-on-hold
Example:
Router(config)# ccm-manager music-on-hold
Step 2
interface loopback number
Example:
Router(config)# interface loopback 1
Step 3
ip address ip-address mask
Example:
Router(config-if)# ip address 10.1.1.1 255.255.255.255
Step 4
exit
Example:
Router(config-if)# exit
Step 5
interface fastethernet slot/port
Example:
Router(config)# interface fastethernet 0/0
Step 6
ip address ip-address mask
Example:
Router(config-if)# ip-address 172.21.51.143
255.255.255.192
Step 7
exit
Example:
Router(config-if)# exit
Step 8
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Cisco Unified SCCP and SIP SRST System Administrator Guide
298
Appendix B: Integrating Cisco Unified Communications Manager and Cisco Unified SRST to Use Cisco Unified SRST
max-dn max-directory-number
moh filename
multicasting-enabled
multicast moh multicast-address port port [route ip-address-list]
exit
Purpose
Enables the multicast MOH feature on a voice
gateway.
Configures an interface type and enters the
interface configuration mode.
number—Loopback interface number. The
•
range is from 0 to 2147483647.
Sets a primary IP address for an interface.
• ip-address—IP address.
• mask—Mask for the associated IP subnet.
Exits interface configuration mode.
(Optional if the route keyword is not used in the
multicast moh command. See Step 9 and
Step 13.) Configures an interface type and enters
interface configuration mode.
(Optional if the route keyword is not used in the
multicast moh command. See Step 9 and
Step 13.) Sets a primary IP address for an
interface.
(Optional if the route keyword is not used in the
multicast moh command. See Step 9 and
Step 13.) Exits interface configuration mode.
Enters call-manager-fallback configuration mode.
OL-13143-04