Configuring Voice-Mail Access Over Fxo And Fxs: Example; Configuring Voice-Mail Access Over Bri And Pri: Example - Cisco CP-7911G-CH1 System Administrator Manual

Integrating Voice Mail with Cisco Unified SRST
max-ephones 24
max-dn 144
ip source-address 1.4.214.104 port 2000
voicemail 14011
call-forward busy 14011
call-forward noan 14011 timeout 3
!
! Cisco Unified SRST Voice-Mail Integration Pattern Configuration
!
vm-integration
pattern direct 2 CGN *
pattern ext-to-ext no-answer 5 FDN * CGN *
pattern ext-to-ext busy 7 FDN * CGN *
pattern trunk-to-ext no-answer 4 FDN * CGN *
pattern trunk-to-ext busy 6 FDN * CGN *

Configuring Voice-Mail Access over FXO and FXS: Example

The following example shows how to configure the Cisco Unified SCCP SRST router to forward
unanswered calls to voice mail. In this example, the voice-mail number is 1101, the voice-mail system
is connected to FXS voice port 1/1/1, and the voice mailbox numbers are 3001, 3002, and 3006.
voice-port 1/1/1
timing digit 250
timing inter-digit 250
dial-peer voice 1102 pots
destination-pattern 1101T
port 1/1/1
call-manager-fallback
timeouts interdigit 5
ip source-address 1.6.0.199 port 2000
max-ephones 24
max-dn 24
transfer-pattern 3...
voicemail 1101
call-forward busy 1101
call-forward noan 1101 timeout 3
moh minuet.au
vm-integration
pattern direct * CGN
pattern ext-to-ext no-answer # FDN #2
pattern ext-to-ext busy # FDN #2
pattern trunk-to-ext no-answer # FDN #2
pattern trunk-to-ext busy # FDN #2

Configuring Voice-Mail Access over BRI and PRI: Example

The following example shows how to configure the Cisco Unified SCCP SRST router to forward
unanswered calls to voice mail. In this example, the voice-mail number is 1101, the voice-mail system
is connected to a BRI or PRI voice port, and the voice mailbox numbers are 3001, 3002, and 3006.
controller T1 2/0
framing esf
clock source line primary
OL-13143-04
Cisco Unified SCCP and SIP SRST System Administrator Guide
Configuration Examples for SCCP SRST
251