Cisco CP-7911G-CH1 System Administrator Manual page 242

How to Integrate Voice Mail with Cisco Unified SCCP and SIP SRST
Command or Action
Step 5
exit
Example:
Router(config-cm-fallback)# exit
Step 6
voice register pool tag
Example:
Router(config)# voice register pool 1
Step 7
call-forward b2bua busy directory-number
Example:
Router(config-register-pool)# call-forward
b2bua busy 2000
Step 8
call-forward b2bua noan directory-number
timeout seconds
Example:
Router(config-register-pool)# call-forward noan
2000 timeout 10
Step 9
exit
Example:
Router(config-register-pool)# exit
Examples
The following example specifies 1101 as the speed-dial number that is issued when message buttons are
pressed on Cisco Unified IP Phones connected to the Cisco Unified SRST router. All busy and
unanswered calls are configured to be forwarded to the voice-mail number (1101).
call-manager-fallback
voicemail 1101
call-forward busy 1101
call-forward noan 1101 timeout 3
voice register pool 1
call-forward b2bua busy 1101
call-forward b2bua noan 1101 timeout 3
Cisco Unified SCCP and SIP SRST System Administrator Guide
242
Integrating Voice Mail with Cisco Unified SRST
Purpose
Exits call-manager-fallback configuration mode.
Enters voice register pool configuration mode.
Configures call forwarding to another number when the
Cisco SIP IP phone is busy.
directory-number: Selected directory number
•
representing a fully qualified E.164 number. This
number can contain "." wildcard characters that
correspond to the right-justified digits in the directory
number extension.
Configures call forwarding to another number when no
answer is received from the Cisco SIP IP phone.
directory-number: Selected directory number
•
representing a fully qualified E.164 number. This
number can contain "." wildcard characters that
correspond to the right-justified digits in the directory
number extension.
timeout seconds: Sets the waiting time, in seconds,
•
before the call is forwarded to another phone. The
seconds range is from 3 to 60000.
Exits voice register pool configuration mode.
OL-13143-04