How To Configure Optional Features; Enabling Three-Party G.711 Ad Hoc Conferencing - Cisco CP-7911G-CH1 System Administrator Manual

How to Configure Optional Features

How to Configure Optional Features
This section describe the following optional additional call features:
•
•
The following sections describe how to configure these optional features:
•
•

Enabling Three-Party G.711 Ad Hoc Conferencing

Enabling three-party G.711 ad hoc conferencing involves configuring the maximum number of
simultaneous three-party conferences supported by the Cisco Unified SRST router. For conferencing to
be available, an IP phone must have a minimum of two lines connected to one or more buttons. See the
"Configuring a Secondary Dial Tone" section on page
SUMMARY STEPS
1.
2.
3.
Cisco Unified SCCP and SIP SRST System Administrator Guide
174
login 
!
scheduler allocate 20000 1000
ntp server 10.0.2.10
!
end
Three-party G.711 ad hoc conferencing—Cisco Unified Survivable Remote Site Telephony (SRST)
support for simultaneous three-party conferences.
eXtensible Markup Language (XML) application program interface
data from Cisco Unified SRST to management software.
Enabling Three-Party G.711 Ad Hoc Conferencing, page 174
Defining XML API Schema, page 176
call-manager-fallback
max-conferences max-conference-numbers
exit
(
API)— This interface supplies
95.
Configuring Call Handling
OL-13143-04