Infors HT MULTITRON STANDARD Operating Manual page 85

10 Disassembly and Disposal
10.1 Disassembly
10.2 Disposal
29.11.2024
The device must be disassembled and disposed of in an environmen-
tally-friendly manner if it is not in use anymore.
If the device is to be returned to the manufacturer for
disassembly and disposal, a legally compliant declara-
tion of decontamination is required for the safety of
all parties involved and to comply with legal require-
ments (⮫ Chapter 2.10 'Declaration of Decontamina-
tion' on page 22).
Prior to disassembly:
Switch off the device and secure against reactivation.
■
Physically disconnect the main energy supply from the device and
■
wait for any components to fully discharge.
Remove and dispose of all operating and auxiliary materials as well
■
as remaining processing materials in an environmental acceptable
manner.
Clean and disassemble component parts professionally with regard
to any local regulations concerning employment and environmental
protection. If possible, separate materials.
Recycle disassembled components if no agreement is made con-
cerning reclaim or disposal.
Scrap metals.
■
Recycle plastic components.
■
Sort and dispose of the remaining components according their
■
material composition.
WARNING
Electronic waste, electronic components, lubricants or other auxil-
iary materials/supplies are subject to hazardous waste regulations
and may only be disposed of by registered specialist disposal firms.
Multitron Standard - Operating manual
Disassembly and Disposal
Page 85 of 104