Infors HT MULTITRON STANDARD Operating Manual page 62

Multitron Standard - Operating manual
Operation
One-Time Change from Phase 1 to 2
Page 62 of 104
If the device is programmed this way, the setpoint settings for the
cultivation process parameters will change when the specified time
expires. The device will then keep running using the setpoints speci-
fied for the second phase until the device is stopped by deactivating
the parameters.
Example applications:
Starting the cultivation process on a time delay
■
Induction of a protein expression
■
Stopping or slowing down a cultivation process after a defined
■
period of time
29.11.2024