Infors HT MULTITRON STANDARD Operating Manual page 72

Multitron Standard - Operating manual
Rectifying Faults
7 Rectifying Faults
7.1 Safety Notes
7.2 Messages in the View Boxes
Page 72 of 104
WARNING
Improper rectification of faults may lead to dangerous situations.
− To prevent life-threatening electric shocks, always switch off the
device and disconnect it from the power supply before carrying
out any work to find the cause of the fault or to rectify the fault.
− Never remove the covers of the device.
− Damaged parts may only be replaced by an INFORS HT service
technician, a licensed dealer or authorised expert personnel.
− Contact the manufacturer in case of faults that cannot be
resolved by following the notices below. For service contact
details, see page 2.
Faults in the device are divided into two categories:
Alarms refer to errors in the process, for example, when the
■
actual parameter values deviate from the setpoints. Alarms do
not directly affect the process; the device can continue running
without any restrictions.
Error messages relate to technical faults in the device. Depending
■
on the type of the error in question, either the device or individual
components is brought to an immediate stop. In such cases, it is
not possible to put the device back into operation until the error
has been resolved.
29.11.2024