Switching Off The Device - Infors HT MULTITRON STANDARD Operating Manual

Multitron Standard - Operating manual
Operation
6.7

Switching off the Device

Page 70 of 104
Press and hold the F- and FT-buttons (3 and 2) at the same time.
�� The
�� The operating hours for the individual components are dis-
played one after the other:
■
■
RPM
■
°C
Example above: Operating hours for motor controller = 14042 hours
NOTICE
Parameters that have not been deactivated before the device
is switched off are automatically activated when the device is
switched on again. This can damage the device and the cultivation
vessels.
−
Deactivate all active parameters before switching off the device.
− Do not leave any objects in the incubation chamber when the
device is switched off.
NOTICE
Switching the device on and off frequently places strain on the
electronic components. As such, only switch off the device prior to
longer breaks in use (> 1 day). When interrupting operation for short
periods of time, simply deactivate the parameters.
Timer active function symbol (1) lights up.
Operating hours – power supply on
Operating hours – motor controller
Operating hours – temperature control
The parameter setpoints are stored for approx. one
month.
29.11.2024