Infors HT MULTITRON STANDARD Operating Manual page 80

Multitron Standard - Operating manual
Cleaning and Maintenance
8 Cleaning and Maintenance
8.1 Maintenance
Interval
Prior to each use
After each use
Annually
Every 3 years
Page 80 of 104
WARNING
Improper cleaning and maintenance of the device may lead to dan-
gerous situations.
−
To prevent life-threatening electric shocks, always switch off the
device and disconnect it from the power supply before carrying
out any maintenance or cleaning.
− Never remove the covers of the device.
− Damaged parts may only be replaced by an INFORS HT service
technician, a licensed dealer or authorised expert personnel.
The device requires hardly any maintenance. This reduces the running
costs to certain regular checks and cleaning. The following table
describes the maintenance work that is required to ensure optimum,
fault-free operation.
If increased wear is detected during regular checks, the required
maintenance intervals must be shorted in accordance with the actual
signs of wear. Keep in mind that various media or gases have more
or less corrosive effects on the metal parts. When using particularly
aggressive substances, more frequent checks are required to maintain
smooth device operation.
Contact the manufacturer if you have questions about maintenance
work and intervals, see service contact details on page 2.
Maintenance work
Check all seals on the device, especially on the door,
and replace if necessary.
Check whether the interior lighting works; have
lighting elements replaced if necessary.
Clean the device; if necessary, disinfect thoroughly.
Have sensors calibrated at least once per year to
ensure that the measuring results remain accurate.
If using the "cooling" option, have the cooling liquid
replaced. To do this, contact INFORS HT.
Personnel
Operator
Operator
Operator
Technician
INFORS HT service techni-
cian or licensed dealer
29.11.2024