Infors HT MULTITRON STANDARD Operating Manual page 32

Multitron Standard - Operating manual
Setup and Function
3.7 Markings on the Device
3.7.1 Identification Plate
Position
Content
3.7.2 Identification of the Throw
Page 32 of 104
The identification plate is located on the left-hand side of the device,
near the mains connection. A second identification plate is located at
the bottom of the door.
The identification plate is designed to allow clear identification of the
device. It contains the following information:
Manufacturer's name
■
Designation = category of device
■
Type = device type (name)
■
S/N = serial number
■
Year = year of manufacture
■
Mains = nominal voltage and frequency
■
Current = power consumption
■
Manufacturer's address
■
CE marking
■
On the back wall inside the incubation chamber, there is a sticker that
Throw ).
identifies the throw (
29.11.2024